A Systematic Literature Review of Sustainable Manufacturing: Green Manufacturing Practices in Asia
DOI:
https://doi.org/10.35806/ijoced.v5i2.375Keywords:
Green manufacturing, Manufacturing process, PRISMA Research-method, Sustainable manufacturing, Waste reductionAbstract
Sustainable manufacturing is a popular topic due to its importance. Green manufacturing practices have been widely applied in Asia. This study aims to provide a comprehensive overview of the current state of knowledge on sustainable manufacturing practices in Asia, with a particular emphasis on green manufacturing practices. Based on the systematic literature review using VOSViewer software to analyze the content of the published articles, the literature on sustainable manufacturing practices can be classified into three main categories, which are Sustainable manufacturing, Sustainability practices, and Environmental management. Most of the literature related to Green & sustainable science & technology, Environmental Science, Engineering, Manufacturing, Engineering, Environmental, and Environmental Studies that is accounted by 18.84%, 17.39%, 10.41%, 10.41% and 8.70% of the total documents included in the review, respectively.
References
Abbass, K., Qasim, M. Z., Song, H., Murshed, M., Mahmood, H., & Younis, I. (2022). A review of the global climate change impacts, adaptation, and sustainable mitigation measures. Environmental Science and Pollution Research, 29(28), 42539–42559. https://doi.org/10.1007/s11356-022-19718-6
Abdul-Rashid, S. H., N., S., Raja Ghazilla, R. A., & Ramayah, T. (2017). The impact of sustainable manufacturing practices on sustainability performance: Empirical evidence from Malaysia. International Journal of Operations & Production Management, 37, 182–204. https://doi.org/10.1108/IJOPM-04-2015-0223
Abdul-Rashid, S. H., Sakundarini, N., Raja Ghazilla, R. A., & Thurasamy, R. (2017). The impact of sustainable manufacturing practices on sustainability performance. International Journal of Operations & Production Management, 37(2), 182–204. https://doi.org/10.1108/IJOPM-04-2015-0223
Abualfaraa, W., Salonitis, K., Al-Ashaab, A., & Ala’raj, M. (2020). Lean-Green Manufacturing Practices and Their Link with Sustainability: A Critical Review. Sustainability, 12(3). https://doi.org/10.3390/su12030981
Cai, W., Lai, K., Liu, C., Wei, F., Ma, M., Jia, S., Jiang, Z., & Lv, L. (2019). Promoting sustainability of manufacturing industry through the lean energy-saving and emission-reduction strategy. Science of The Total Environment, 665, 23–32. https://doi.org/https://doi.org/10.1016/j.scitotenv.2019.02.069
Carvalho, N., Chaim, O., Cazarini, E., & Gerolamo, M. (2018). Manufacturing in the fourth industrial revolution: A positive prospect in Sustainable Manufacturing. Procedia Manufacturing, 21, 671–678. https://doi.org/https://doi.org/10.1016/j.promfg.2018.02.170
Cherrafi, A., Garza-Reyes, J. A., Kumar, V., Mishra, N., Ghobadian, A., & Elfezazi, S. (2018). Lean, green practices and process innovation: A model for green supply chain performance. International Journal of Production Economics, 206, 79–92. https://doi.org/https://doi.org/10.1016/j.ijpe.2018.09.031
Fercoq, A., Lamouri, S., & Carbone, V. (2016). Lean/Green integration focused on waste re-duction techniques. Journal of Cleaner Production, 137, 567–578. https://doi.org/https://doi.org/10.1016/j.jclepro.2016.07.107
Guo, A., Kong, D., Zhou, X., Qu, P., Wang, S., Li, J., Li, F., Wang, L., & Hu, Y. (2022). Evaluation of material reuse degree in additive manufacturing by the improved resolution coefficient grey correlation method. Process Safety and Environmental Protection, 166, 451–460. https://doi.org/https://doi.org/10.1016/j.psep.2022.08.026
Hartini, S., Ciptomulyono, U., Anityasari, M., & Sriyanto. (2020). Manufacturing sustainability assessment using a lean manufacturing tool. International Journal of Lean Six Sigma, 11(5), 943–971. https://doi.org/10.1108/IJLSS-12-2017-0150
Hussain, M., Butt, A. R., Uzma, F., Ahmed, R., Irshad, S., Rehman, A., & Yousaf, B. (2019). A comprehensive review of climate change impacts, adaptation, and mitigation on environmental and natural calamities in Pakistan. Environmental Monitoring and Assessment, 192(1), 48. https://doi.org/10.1007/s10661-019-7956-4
Ike, M., Donovan, J. D., Topple, C., & Masli, E. K. (2019). The process of selecting and prioritising corporate sustainability issues: Insights for achieving the Sustainable Development Goals. Journal of Cleaner Production, 236, 117661. https://doi.org/10.1016/J.JCLEPRO.2019.117661
Karuppiah, K., Sankaranarayanan, B., Ali, S. M., Chowdhury, P., & Paul, S. K. (2020). An integrated approach to modeling the barriers in implementing green manufacturing practices in SMEs. Journal of Cleaner Production, 265, 121737. https://doi.org/https://doi.org/10.1016/j.jclepro.2020.121737
Kraus, S., Rehman, S. U., & García, F. J. S. (2020). Corporate social responsibility and environmental performance: The mediating role of environmental strategy and green in-novation. Technological Forecasting and Social Change, 160, 120262. https://doi.org/https://doi.org/10.1016/j.techfore.2020.120262
Kusiak, A. (2018). Smart manufacturing. International Journal of Production Research, 56(1–2), 508–517. https://doi.org/10.1080/00207543.2017.1351644
Lin, H.-T., Chiang, C.-W., Cai, J.-N., Chang, H.-Y., Ku, Y.-N., & Schneider, F. (2023). Evaluating the waste and CO2 reduction potential of packaging by reuse model in supermarkets in Taiwan. Waste Management, 160, 35–42. https://doi.org/https://doi.org/10.1016/j.wasman.2023.01.028
Lis, A., Sudolska, A., & Tomanek, M. (2020). Mapping Research on Sustainable Supply-Chain Management. Sustainability, 12(10), 3987. https://doi.org/10.3390/su12103987
Machado, C. G., Winroth, M. P., & Ribeiro da Silva, E. H. D. (2020). Sustainable manufacturing in Industry 4.0: an emerging research agenda. International Journal of Production Research, 58(5), 1462–1484. https://doi.org/10.1080/00207543.2019.1652777
Masudin, I., Wastono, T., & Zulfikarijah, F. (2018). The effect of managerial intention and initiative on green supply chain management adoption in Indonesian manufacturing performance. Cogent Business & Management, 5(1), 1485212. https://doi.org/10.1080/23311975.2018.1485212
MUHARDI, M., CINTYAWATI, C., ADWIYAH, R., HAMI, N., HASHIM, R., OMAR, S., & SHAFIE, S. M. (2020). The Implementation of Sustainable Manufacturing Practice in Textile Indus-try: An Indonesian Perspective. The Journal of Asian Finance, Economics and Business, 7(11), 1041–1047. https://doi.org/10.13106/jafeb.2020.vol7.no11.1041
Ngu, H. J., Lee, M. D., & Bin Osman, M. S. (2020). Review on current challenges and future opportunities in Malaysia sustainable manufacturing: Remanufacturing industries. Journal of Cleaner Production, 273, 123071. https://doi.org/10.1016/J.JCLEPRO.2020.123071
Qureshi, M. I., Khan, N., Qayyum, S., Malik, S., Hishan, S. S., & Ramayah, T. (2020). Classifications of Sustainable Manufacturing Practices in ASEAN Region: A Systematic Review and Bibliometric Analysis of the Past Decade of Research. Sustainability, 12(21). https://doi.org/10.3390/su12218950
Rehman, S. U., Kraus, S., Shah, S. A., Khanin, D., & Mahto, R. V. (2021). Analyzing the relationship between green innovation and environmental performance in large manufacturing firms. Technological Forecasting and Social Change, 163, 120481. https://doi.org/https://doi.org/10.1016/j.techfore.2020.120481
Rusinko, C. (2007). Green Manufacturing: An Evaluation of Environmentally Sustainable Manufacturing Practices and Their Impact on Competitive Outcomes. IEEE Transactions on Engineering Management, 54(3), 445–454. https://doi.org/10.1109/TEM.2007.900806
Sarkis, J., & Zhu, Q. (2017). Environmental Sustainability and Production: Taking the Road Less Traveled. International Journal of Production Research. https://doi.org/10.1080/00207543.2017.1365182
Sartal, A., Bellas, R., Mejías, A. M., & García-Collado, A. (2014). The sustainable manufacturing concept, evolution and opportunities within Industry 4.0: A literature review. Advances in Mechanical Engineering, 12(5), 1687814020925232. https://doi.org/10.1177/1687814020925232
Sharma, R., Jabbour, C. J. C., & Lopes de Sousa Jabbour, A. B. (2021). Sustainable manufacturing and industry 4.0: what we know and what we don’t. Journal of Enterprise Information Management, 34(1), 230–266. https://doi.org/10.1108/JEIM-01-2020-0024
Shu, F., Julien, C. A., Zhang, L., Qiu, J., Zhang, J., & Larivière, V. (2019). Comparing journal and paper level classifications of science. Journal of Informetrics, 13(1), 202–225. https://doi.org/10.1016/J.JOI.2018.12.005
Tang, Z., Li, W., Tam, V. W. Y., & Xue, C. (2020). Advanced progress in recycling municipal and construction solid wastes for manufacturing sustainable construction materials. Resources, Conservation & Recycling: X, 6, 100036. https://doi.org/https://doi.org/10.1016/j.rcrx.2020.100036
Wahab, A., & Leo, P. (2022). Lean Manufacturing and Sustainable Performance with a Moderation of Organizational Culture. 1, 30–52.
Yong, J. Y., Yusliza, M.-Y., Ramayah, T., Jabbour, C., Sehnem, S., & Mani, V. (2019a). Pathways towards sustainability in manufacturing organizations: Empirical evidence on the role of green human resource management. Business Strategy and the Environment, 29. https://doi.org/10.1002/bse.2359
Abdul-Rashid, S. H., N., S., Raja Ghazilla, R. A., & Ramayah, T. (2017). The impact of sustainable manufacturing practices on sustainability performance: Empirical evidence from Malaysia. International Journal of Operations & Production Management, 37, 182–204. https://doi.org/10.1108/IJOPM-04-2015-0223
Abdul-Rashid, S. H., Sakundarini, N., Raja Ghazilla, R. A., & Thurasamy, R. (2017). The impact of sustainable manufacturing practices on sustainability performance. International Journal of Operations & Production Management, 37(2), 182–204. https://doi.org/10.1108/IJOPM-04-2015-0223
Abualfaraa, W., Salonitis, K., Al-Ashaab, A., & Ala’raj, M. (2020). Lean-Green Manufacturing Practices and Their Link with Sustainability: A Critical Review. Sustainability, 12(3). https://doi.org/10.3390/su12030981
Cai, W., Lai, K., Liu, C., Wei, F., Ma, M., Jia, S., Jiang, Z., & Lv, L. (2019). Promoting sustainability of manufacturing industry through the lean energy-saving and emission-reduction strategy. Science of The Total Environment, 665, 23–32. https://doi.org/https://doi.org/10.1016/j.scitotenv.2019.02.069
Carvalho, N., Chaim, O., Cazarini, E., & Gerolamo, M. (2018). Manufacturing in the fourth industrial revolution: A positive prospect in Sustainable Manufacturing. Procedia Manufacturing, 21, 671–678. https://doi.org/https://doi.org/10.1016/j.promfg.2018.02.170
Cherrafi, A., Garza-Reyes, J. A., Kumar, V., Mishra, N., Ghobadian, A., & Elfezazi, S. (2018). Lean, green practices and process innovation: A model for green supply chain performance. International Journal of Production Economics, 206, 79–92. https://doi.org/https://doi.org/10.1016/j.ijpe.2018.09.031
Fercoq, A., Lamouri, S., & Carbone, V. (2016). Lean/Green integration focused on waste re-duction techniques. Journal of Cleaner Production, 137, 567–578. https://doi.org/https://doi.org/10.1016/j.jclepro.2016.07.107
Guo, A., Kong, D., Zhou, X., Qu, P., Wang, S., Li, J., Li, F., Wang, L., & Hu, Y. (2022). Evaluation of material reuse degree in additive manufacturing by the improved resolution coefficient grey correlation method. Process Safety and Environmental Protection, 166, 451–460. https://doi.org/https://doi.org/10.1016/j.psep.2022.08.026
Hartini, S., Ciptomulyono, U., Anityasari, M., & Sriyanto. (2020). Manufacturing sustainability assessment using a lean manufacturing tool. International Journal of Lean Six Sigma, 11(5), 943–971. https://doi.org/10.1108/IJLSS-12-2017-0150
Hussain, M., Butt, A. R., Uzma, F., Ahmed, R., Irshad, S., Rehman, A., & Yousaf, B. (2019). A comprehensive review of climate change impacts, adaptation, and mitigation on environmental and natural calamities in Pakistan. Environmental Monitoring and Assessment, 192(1), 48. https://doi.org/10.1007/s10661-019-7956-4
Ike, M., Donovan, J. D., Topple, C., & Masli, E. K. (2019). The process of selecting and prioritising corporate sustainability issues: Insights for achieving the Sustainable Development Goals. Journal of Cleaner Production, 236, 117661. https://doi.org/10.1016/J.JCLEPRO.2019.117661
Karuppiah, K., Sankaranarayanan, B., Ali, S. M., Chowdhury, P., & Paul, S. K. (2020). An integrated approach to modeling the barriers in implementing green manufacturing practices in SMEs. Journal of Cleaner Production, 265, 121737. https://doi.org/https://doi.org/10.1016/j.jclepro.2020.121737
Kraus, S., Rehman, S. U., & García, F. J. S. (2020). Corporate social responsibility and environmental performance: The mediating role of environmental strategy and green in-novation. Technological Forecasting and Social Change, 160, 120262. https://doi.org/https://doi.org/10.1016/j.techfore.2020.120262
Kusiak, A. (2018). Smart manufacturing. International Journal of Production Research, 56(1–2), 508–517. https://doi.org/10.1080/00207543.2017.1351644
Lin, H.-T., Chiang, C.-W., Cai, J.-N., Chang, H.-Y., Ku, Y.-N., & Schneider, F. (2023). Evaluating the waste and CO2 reduction potential of packaging by reuse model in supermarkets in Taiwan. Waste Management, 160, 35–42. https://doi.org/https://doi.org/10.1016/j.wasman.2023.01.028
Lis, A., Sudolska, A., & Tomanek, M. (2020). Mapping Research on Sustainable Supply-Chain Management. Sustainability, 12(10), 3987. https://doi.org/10.3390/su12103987
Machado, C. G., Winroth, M. P., & Ribeiro da Silva, E. H. D. (2020). Sustainable manufacturing in Industry 4.0: an emerging research agenda. International Journal of Production Research, 58(5), 1462–1484. https://doi.org/10.1080/00207543.2019.1652777
Masudin, I., Wastono, T., & Zulfikarijah, F. (2018). The effect of managerial intention and initiative on green supply chain management adoption in Indonesian manufacturing performance. Cogent Business & Management, 5(1), 1485212. https://doi.org/10.1080/23311975.2018.1485212
MUHARDI, M., CINTYAWATI, C., ADWIYAH, R., HAMI, N., HASHIM, R., OMAR, S., & SHAFIE, S. M. (2020). The Implementation of Sustainable Manufacturing Practice in Textile Indus-try: An Indonesian Perspective. The Journal of Asian Finance, Economics and Business, 7(11), 1041–1047. https://doi.org/10.13106/jafeb.2020.vol7.no11.1041
Ngu, H. J., Lee, M. D., & Bin Osman, M. S. (2020). Review on current challenges and future opportunities in Malaysia sustainable manufacturing: Remanufacturing industries. Journal of Cleaner Production, 273, 123071. https://doi.org/10.1016/J.JCLEPRO.2020.123071
Qureshi, M. I., Khan, N., Qayyum, S., Malik, S., Hishan, S. S., & Ramayah, T. (2020). Classifications of Sustainable Manufacturing Practices in ASEAN Region: A Systematic Review and Bibliometric Analysis of the Past Decade of Research. Sustainability, 12(21). https://doi.org/10.3390/su12218950
Rehman, S. U., Kraus, S., Shah, S. A., Khanin, D., & Mahto, R. V. (2021). Analyzing the relationship between green innovation and environmental performance in large manufacturing firms. Technological Forecasting and Social Change, 163, 120481. https://doi.org/https://doi.org/10.1016/j.techfore.2020.120481
Rusinko, C. (2007). Green Manufacturing: An Evaluation of Environmentally Sustainable Manufacturing Practices and Their Impact on Competitive Outcomes. IEEE Transactions on Engineering Management, 54(3), 445–454. https://doi.org/10.1109/TEM.2007.900806
Sarkis, J., & Zhu, Q. (2017). Environmental Sustainability and Production: Taking the Road Less Traveled. International Journal of Production Research. https://doi.org/10.1080/00207543.2017.1365182
Sartal, A., Bellas, R., Mejías, A. M., & García-Collado, A. (2014). The sustainable manufacturing concept, evolution and opportunities within Industry 4.0: A literature review. Advances in Mechanical Engineering, 12(5), 1687814020925232. https://doi.org/10.1177/1687814020925232
Sharma, R., Jabbour, C. J. C., & Lopes de Sousa Jabbour, A. B. (2021). Sustainable manufacturing and industry 4.0: what we know and what we don’t. Journal of Enterprise Information Management, 34(1), 230–266. https://doi.org/10.1108/JEIM-01-2020-0024
Shu, F., Julien, C. A., Zhang, L., Qiu, J., Zhang, J., & Larivière, V. (2019). Comparing journal and paper level classifications of science. Journal of Informetrics, 13(1), 202–225. https://doi.org/10.1016/J.JOI.2018.12.005
Tang, Z., Li, W., Tam, V. W. Y., & Xue, C. (2020). Advanced progress in recycling municipal and construction solid wastes for manufacturing sustainable construction materials. Resources, Conservation & Recycling: X, 6, 100036. https://doi.org/https://doi.org/10.1016/j.rcrx.2020.100036
Wahab, A., & Leo, P. (2022). Lean Manufacturing and Sustainable Performance with a Moderation of Organizational Culture. 1, 30–52.
Yong, J. Y., Yusliza, M.-Y., Ramayah, T., Jabbour, C., Sehnem, S., & Mani, V. (2019a). Pathways towards sustainability in manufacturing organizations: Empirical evidence on the role of green human resource management. Business Strategy and the Environment, 29. https://doi.org/10.1002/bse.2359
Downloads
Published
2023-10-03
Issue
Section
Articles
How to Cite
A Systematic Literature Review of Sustainable Manufacturing: Green Manufacturing Practices in Asia (S. S. Islami, M. M. Pane, A. G. Salsabila, B. H. Sinawang, I. C. Tarabu, & L. F. Primaputra , Trans.). (2023). Indonesian Journal of Computing, Engineering, and Design (IJoCED), 5(2), 102-117. https://doi.org/10.35806/ijoced.v5i2.375
